Sediment Filter Jumbo Cartridge 20" Special 700 G

This PPF Jumbo Cartridge effectively removes sand, silt, rust, and other visible particles from your water, leaving it clean and pure. With its special 700 G capacity, you can enjoy improved water quality and greater peace of mind. Protect your family's health with this high-performing filtration system.

✅ Benefits

• Improved Water Clarity: Effectively removes visible particles like dirt, sand, rust, and silt, making water cleaner.
• Extended Equipment Life: Protects downstream equipment (RO systems, carbon filters, water heaters, etc.) from clogging and damage.
• Better Taste and Odor Control: Removing sediments helps prevent foul tastes or smells caused by organic debris.
• Cost Savings: Reduces maintenance frequency and replacement costs of more expensive filters and appliances.
• Versatility: Suitable for a variety of residential, commercial, and industrial water filtration systems.

⭐ Key Features

• Size: 20-inch standard size, compatible with most 20" filter housings.
• Material: High-quality polypropylene (PP) melt-blown or spun fiber construction.
• Micron Rating: Available in various micron ratings (commonly 1, 5, 10, 20, or 50 microns) to target specific particle sizes.
• High Dirt-Holding Capacity: Can trap large amounts of particles before needing replacement.
• Thermally Bonded Construction: Ensures durability, uniform filtration, and resistance to chemical degradation.
• High Flow Rate: Designed to handle higher flow demands without significant pressure drop.

🛠️ Applications

• Residential:

1. Whole-house water filtration
2. Pre-filtration for under-sink RO systems

• Commercial:

1. Food and beverage processing
2. Laundry facilities
3. Car washes

• Industrial: 

1. Manufacturing processes
2. Cooling tower water treatment
3. Pretreatment for large-scale RO systems

• Agricultural:

1. Irrigation systems
2. water treatment

📘 Usage Instructions

• Install in a Compatible Housing: Use a standard 20" filter housing. Ensure O-rings and connections are secure.
• Determine Micron Rating Needed:

1. Use 1–5 microns for fine particles (e.g., for drinking water systems).
2. Use 10–50 microns for heavier sediment loads (e.g., well water or industrial use).

• Flow Direction: Install the filter according to the directional flow marking (if any).
• Replace Regularly:

1. Replace every 2-4 months or based on pressure drop or water quality.
2. Monitor via pressure gauges or visible water cloudiness.

• Flush if Necessary: Run water briefly after installation to remove any loose fibers.